"You want to make an omelette? You've gotta break some eggs."
-Tyler Durden (Fight Club)
In today's post, I will be taking you through the process of preparing an old canvas painting in order to reuse it to make a new artwork! I am a firm believer in using what we have and in being as resourceful as possible in our explorations. Because, as most of you already know, us artists explore a WHOLE darn lot and we have to be smart about how we spend our money.
First and foremost, a bit about the original painting. This canvas was a part of an artwork composed of three separate panels (three long rectangles meant to be hung vertically side by side). The paintings around 35 years old. Probably more. Another important note is that these artworks seem to have been created using very thin applications of acrylic paint. It is definitely not oil. And they don’t have much texture to them at all. I took all of these points into consideration when I decided to use them in my explorations. I knew resurfacing them was going to be easy and that they presented good opportunities for me to work on a size and format I had never worked on before. My main point is, canvases with thickly applied paint or a lot of texture on them will probably require more work because more sanding will be required.
Secondly, I used regular Gesso I had at hand in order to resurface my canvas. There is a lot of debate whether or not it is ¨safe¨ to use oil paint on a canvas prepped with gesso. A lot of folks believe that it should not be done because it is just a recipe for cracking, peeling and an overall less durable painting. Other artists believe that a good quality Gesso can serve as base for practically any type of paint or medium. I think it is up to you to figure out if this will work for your specific type of artwork or not, and the only way of finding this out is through first-hand experimentation. Perhaps your just experimenting and learning like me, and aren't really looking to create a masterpiece that will be passed on from generation to generation. In this case, it doesn't really matter. Something you DO have to keep in mind is that if your goal is to resurface an old oil painting, a whole new set of rules apply. Regular Gesso cannot be used for this purpose. You would need an oil-specific ground and/or primer (I will not go into this process today because it is not something I have personally tried). So, once again, you CAN create an oil painting over traditional Gesso, but you CANNOT apply gesso over an oil painting. Are you with me?
I personally didn't worry much about creating an impeccable surface for this project because, as previously stated, I knew since the beginning that this was mostly an exploration for me. However, if it worries you, a solution is to apply Lindseed Oil prior to starting the painting process. Simply brush this all over the previously dried gesso and allow it to soak for about 24 hours. Afterwards, wipe off the canvas with a dry cloth and let the games begin! The idea is that the gesso will absorb some of this oil and it is less likely to make the painting crack later.
How to Reuse an Old Canvas Using Gesso:
You will need:
-Old canvas painting/print/pretty much whatever as long as it's not an oil painting
-Thick used up/cheap brush
-Glass containers for water
-Linseed oil (*Optional)
1. Wipe clean the old artwork. Make sure it is clear of dust and other particles.
2. Sandpaper the surface using light pressure and focusing on highly textured areas. Don’t fret so much about getting the surface super even if the painting has a lot of texture to it. Wipe surface using a cloth.
3. Apply first layer of Gesso as evenly as possible and allow to dry for a couple of hours. If your Gesso is too thick and this bothers you, you can add a bit of water to it. Make sure that first layer completely dries before continuing with the next step. If it feels damp to the touch, this means you should wait longer.
3. If you want to start off with a textured surface, simply apply a second layer of Gesso. If you don't want so much texture, sand your surface gently once more, wipe to remove particles, and apply second layer of Gesso (you can sand it once more after it dries).
At this point it should be ready to be painted on! But if you are still a bit nervous about not having a quality surface to work on, use the Linseed Oil suggestion I mentioned before. I will be trying this out on the next one!
To end this post, I would like to encourage you to always keep learning and not be afraid of devoting time to a process that might not produce the most amazing of artworks. Keep experimenting and be proud of yourself for simply going through a learning process. I firmly believe that the process matters more than the final outcome in both life AND our artistic journeys.
After I have devoted a solid amount of time into any artwork, I like to analyze it and make notes about what I learned throughout the process. In this case, here is what I wrote:
In this section of my website I will be posting helpful information
for other artists and
art educators, as well
as my own thoughts
and personal artistic progress.
Do not hesitate to
reach out to me if you have any questions regarding my work,
or if you have any ideas
I can help out with.
Feel free to send me an
email using the mail icon on the side, through the form in the Work With Me section of my website, or through social media!
Hope you enjoy and find this useful/inspiring!